Home

FORD RANGER BODY BOX FORD RANGER BODY DRAWERS FORD RANGER PULL-OUT TRAYS 2 Drawer Bed Trunk with Sliding Drawers and Sliding Tray for Ford Ranger Double and Super Cab Equipped with a sliding upper floor. Possibility of adapting the sides to the vehicle, which will allow you to obtain a higher floor area equal to the entire body. It is equipped with 2 lockable drawers with keys. Provides ample storage space that is both practical and functional Weight 70 kg Capacity of open interior drawers: 100kgs Slide Sliding Top Out: 50kgs Drawer Interior Height 16cm Total height of frames + drawers + top: 24.5 cm Inner Length: 126cm Interior width: 42 cm NOT COMPATIBLE WITH ELECTRIC CURTAIN DUE TO DRAIN PIPES Technical note: The installation of the drawer requires drilling the body

UNIVERSAL TIPPER BOX 
UNIVERSAL BODY DRAWERS 
UNIVERSAL SLIDING TRAYS 

Universal Dumpster Box with 2 Sliding Drawers and Sliding Trays for Pick-up

The universal tipper drawers are compatible with all pick-up models and body sizes. They are equipped with a sliding upper floor.
Equipped with a sliding upper floor. Possibility of adapting the sides to the vehicle, which will allow you to obtain a higher floor area equal to the entire body.


It is equipped with 2 lockable drawers with keys.
- Provides ample storage space that is both practical and functional

Weight 70 kgCapacity open inner drawers: 100kgs
Slide Sliding Top Out: 50kgs
Drawer Interior Height 16cm
Total height of frames + drawers + top: 24.5 cm
Inner Length: 126cm
Interior width: 42 cm
NOT COMPATIBLE WITH ELECTRIC CURTAIN DUE TO DRAIN PIPES
REQUIRES DRILLING OF THE BODY

D-MAX ALUMINIUM SLIDING CURTAIN D-MAX ALUMINIUM TIPPER COVER Aluminium Sliding Curtain - Tessera - 100% Manual for Isuzu D-Max - from 2007 Features: - Reliability, durability and ease of use thanks to its fully manual design without springs or motors - Use the strap to close the curtain manually. - Mounting kit included - Side rails in special aluminium (5mm thick) - Full-length movable white LED light bar located inside the rolling end slat, which highlights the center of the bed - Specially designed interior locking system with aluminum locking hooks, to prevent unauthorized access - Installation does not require any drilling, this tipper cover canbe easily installed on vehicles with or without a tipper with or without a rim - Aerodynamic design for better fuel economy - Specially designed slats that are wider, stronger and "knife-proof", for 100% load safety and rubber for ultimate insulation. - 2 specially designed Φ20 drainage systems, with 2 overflow systems and "ANTI-LEAF" technology integrated into the trunk area, for complete drainage and water protection (60 liters/minute). - An innovative design of the rear slat, combined with the smaller dimensions of the boot (20cm x 23cm), offers the advantage of maximising the net loading capacity in length and height – Class 2 standard paint, particularly resistant to extreme weather conditions

NAVARA EXTENSION KIT KIT SUSPENSION NAVARA Promyges Extension Kit for Nissan Navara D40 - Ensures smooth driving while supporting a heavy load. - Ideal for mixed use (asphalt and off-road). This extension kit includes: - Front shock absorbers - Rear shock absorbers (+ shims for raising the rear blade) - 5cm extension / Crossing assist.

D-MAX SLIDING TRAY Sliding Bed Bed for Isuzu D-Max N60 Crew Cab from 2021 Designed for easy access to your load, this slide-out bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. - Easy installation and disassembly (without drilling) - Supports 250 Kg of load - 3 possible locking notches - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to handle with a handle - Cleans with a water jet very easily - Height between the bottom of the bed and the platform: 11 to 15 cm

CLASS X SLIDING TRAY Sliding Bed Bed for Mercedes X-Class Designed for easy access to your load and the bottom of the bucket, this pull-out bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. Perfect for taking full advantage of the volume of the tipper. An accessory designed especially for professionalsbut also makes life easier for individuals. - Composite wood top with wide rim on a rolling metal structure - Easy installation and disassembly (without drilling) - Supports 250 Kg of load in open position, 500 kg in closed position - Metal frame with anchor points - 3 locking notches possible - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to handle with a handle - Cleans with a water jet very easily - Height between the bottom of the bed and the platform: 11 to 15 cm - Compatible with tipper tray with and without rim

ACTYON SPORT SLIDING TRAY Sliding Bed Bed for Ssangyong Actyon Sport Double Cab from 2012 Designed for easy access to your load, this slide-out bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. - Easy installation and disassembly (without drilling) - Supports 250 Kg of load - 3 possible locking notches - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to handle with a handle - Cleans with a water jet very easily - Height between the bottom of the bed and the platform: 11 to 15 cm

D-MAX SLIDING TRAY Sliding Bed Bed for Isuzu D-Max RT50 Crew Cab from 2012 to 2020 Designed for easy access to your load, this slide-out bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. - Easy installation and disassembly (without drilling) - Supports 250 Kg of load - 3 possible locking notches - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to handle with a handle - Cleans with a water jet very easily - Height between the bottom of the bed and the platform: 11 to 15 cm

NAVARA PULL-OUT TRAY Sliding Bed Bed for Nissan Navara NP300 Double Cab from 2016 Designed for easy access to your load, this slide-out bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. - Composite wood top - Easy installation and disassembly (without drilling) - Supports 250 Kg of load - Metal frame with anchor points - 3 locking notches possible - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to handle with a handle - Cleans with a water jet very easily - Height between the bottom of the bed and the platform: 11 to 15 cm - Tipper compatible

FULLBACK PULL-OUT TRAY Sliding Bed Bed for Fiat Fullback Double Cab from 2016 Designed for easy access to your load, this sliding bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. - Composite wood top - Supports 250 Kg of load - Metal frame with anchor points - 3 locking notches possible - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to handle with a handle - Cleans with a water jet very easily - Sportguard tipper compatible only - Height between the bottom of the bed and the platform: 11 to 15 cm

SLIDING TRAY L200 Sliding Bed Bed for Mitsubishi L200 Double Cab from 2016 Designed for easy access to your load, this sliding bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. - Composite wood top - Supports 250 Kg of load - Metal frame with anchor points - 3 locking notches possible - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to handle with a handle - Cleans with a water jet very easily - Height between the bottom of the bed and the platform: 11 to 15 cm - Compatible with a dumpster bin

AMAROK PULL-OUT TRAY Sliding Bed Bed for VW Amarok Designed for easy access to your load, this slide-out bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. - Easy installation and disassembly (without drilling) - Dimensions: 138 cm long, 133 cm wide, 18 cm high (without the stand) / 24 cm high with the stand. - Supports 250 Kg of load in open position, 500 kg in closed position - 3 possible locking notches - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to handle with a handle - Cleans with a water jet very easily - Height between the bottom of the bed and the platform: 11 to 15 cm

D MAX DUMPSTER COVER
BARREL COVER D MAX
BARREL COVER D MAX

Striated aluminum dumpster cover for Isuzu D Max Crew or Space Cabin from 2007 to 2012

ULTRA RESISTANT
- Striated aluminum dumpster cover
- Opening at 45°
- Mounted on gas cylinders
- Black carrying bars (up to 70kg of additional load)
- Compatible with a dumpster tray without ledge
- Secure closure with handle + key (2 provided)
- Rapid assembly and disassembly
- Not compatible with hoop

HILUX TIPPER COVER
Black Ribbed Aluminum Bed Cover for Toyota Hilux Revo Double or Extra Cab from 2016
ULTRA-RESISTANT
- Black ribbed aluminium tipper cover
- 45° opening
- Mounted on gas springs
- Rails that allow you to add sliding bars* (up to 75kg of additional load)
- Compatible with rimless tipper
- Secure closure with handle + key (2 included)
- Quick assembly and disassembly

AMAROK TIPPER COVER VOLKSWAGEN AMAROK TIPPER COVER Ribbed aluminium tipper cover for VW Amarok Double Cab - Ribbed aluminium tipper cover - 45° opening - Mounted on gas springs - Rails that allow you to add sliding bars* (up to 70kg of additional load) - Compatible with rimless tipper - Secure closure with handle + key (2 included) - Quick assembly and disassembly Don't forget as an option: Sliding Bar Kit

HILUX SLIDING TRAY Sliding Bed Bed for Toyota Hilux Double Cab from 2016 Designed for easy access to your load, this sliding bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. - Composite wood top - Type 3/Wide version = Full width between the wheel arches - Supports 250 Kg of load - Metal frame with anchor points - 3 locking notches possible - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to use - Handle with push button - Cleans with a water jet very easily - Height between the bottom of the bed and the platform: 11 to 15 cm Click on the "Attached Documents" tab at the bottom of the page to download the assembly instructions

HILUX TIPPER COVER
HILUX TONNEAU COVER
TONNEAU COVER HILUX
Ribbed aluminium tipper cover for Toyota Hilux Revo Double Cab from 2016
ULTRA-RESISTANT
- Ribbed aluminium tipper cover
- 45° opening
- Mounted on gas springs
- Rails that allow you to add sliding bars* (up to 75kg of additional load)
- Compatible with rimless tipper
- Secure closure with handle + key (2 included)
- Quick assembly and disassembly

ACTYON TIPPER COVER
SSANGYONG ACTYON TIPPER COVER

Outback Aluminium Bed Cover for Ssangyong Actyon Sport Double Cab from 2012 to 2017
ULTRA-RESISTANT
- Ribbed aluminium tipper cover
- 45° opening
- Mounted on gas springs
- Rails that allow you to add sliding bars* (load up to 70kg extra)
- Compatible with rimless tipper
- Secure closure with handle + key (2 keys included)
- Ultra-fast assembly and disassembly

RANGER TIPPER COVER
FORD RANGER BED COVER

Ribbed Aluminum Bed Cover For Ford Ranger Double or Super Cab from 2012

ULTRA-RESISTANT
- Ribbed aluminium tipper cover
- 45° opening
- Mounted on gas springs
- Rails that allow you to add sliding bars* (up to 70kg of additional load)
- Compatible with rimless tipper
- Secure closure with handle + key (2 included)
- Quick assembly and disassembly

- Not compatible with the original roll bar
- Not compatible with the original ladder rack

FORD COURIER ROOF RACK ROOF RACK VAN FORD COURIER Open Roof Gallery for Ford Transit Courier L1H1 with doors from 2014 With integrated loading roller - Material: Aluminum - Color: Black - Maximum load capacity: maximum load set by the car manufacturer - Dimension: L 1200 x 200