Best sellers

L200 ENGINE SHIELDING L200 CRANKCASE PROTECTION Crankcase and Lower Engine Shielding for Mitsubishi L200 Double Cab or Club Cab from 2016 to 2019 Provides sufficient protection and is as effective as many thicker, heavier shields - The combination of strength and lightness: In 5mm aluminum - Quality machining and finishing

FORD RANGER ENGINE ARMOR FORD RANGER CRANKCASE PROTECTION Armor of the crankcase and lower engine for Ford Ranger from 2012 - The combination of strength and lightness: In 5mm aluminum - Quality machining and finishing - Offers for most 4x4s sufficient protection and as effective as thicker, heavier armor

CENTRALLY CLOSING RIDELLE D MAX
CENTRALLY CLOSED HAYON D MAX

Electric centralized locking of the dumpster ridelle for Isuzu D Max RT50 from 2012 to 2016

For D-Max without key closure on the rear rod.

- Close the doors of your Pick-Up with your remote control or with the vehicle's original key and... The ridelle will lock too!
- Finally you can safely put everything in your dumpster!
- A complementary accessory and essential to your hard-top or your dumpster cover!
- Easy and fast installation

WALKING FOOT NAVARA

2 stainless steel tubular steps set for Nissan Navara NP300 Double Cab from 2016

- Visserie supplied
- Neoprene non-slip skates

Exist in Black ref N4-MP3

HILUX DEFLECTORS HILUX AIR DEFLECTORS Set of 4 black tinted air deflectors for Toyota Hilux Extra Cab from 2016 These door air deflectors are very useful for diverting air especially in high heat, in dust or... in rainy weather, in the mud... - 3M self-adhesive fasteners - This kit of four deflectors of excellent quality and aesthetics, adds an original PLUS to the design of your vehicle. - Economical, they avoid the intensive use of air conditioning! - Drive your Hilux with the windows open and draught-free! - Colour: Black

RANGER BULL BARS

Black stainless steel bull bars with oval tube CE approved for Ford Ranger from 2012 to 2022

- Approved according to European standards.
- Oval tube diameter 90 mm
- Easily attached to the frame: fixing without drilling
- Requires overriding of the front sensors
- Comes with complete installation kit.

Theinstallation of this bull bar removes the speed limiter and anti-collision detector options if your Ranger is equipped with them.

HILUX RIGID FOLDING BED COVER

Ultra rigid folding bed cover for Toyota Hilux Double or Extra Cab

Ultra-rigid tipper cover, foldable in 3 parts
Its light weight makes it an extremely easy accessory to remove, transport and store
Ready-to-install, it installs in seconds; No tools needed
Powder coating of railway rails that are ultra-resistant to extreme weather
Lashing straps

Compatible with a tipper tray
Not compatible with a roll bar and ladder rack

NAPARA BULL BARS

Black Stainless Steel Bull Bars with Reinforcements (Protective Claws) for Nissan Navara D40 from 2010 to 2015

- Approved according to European standards
- Easily attached to the frame: fixing without drilling
- Oval tube diameter 70 mm.
- Comes with complete installation kit.
- Requires overriding of the front sensors
WARNING: NOT SUITABLE FOR THE D40 V6 VERSION

FORD RANGER HEADLIGHT SURROUNDS
FORD RANGER HUBCAPS

Pack of 2 self-adhesive hubcaps for Ford Ranger headlights from 2016

This kit includes 2 self-adhesive Wildtrak grey surrounds for the front lights

- Colour: Wildtrak Grey

HARD TOP NAVARA
HARD TOP NISSAN NAVARA

Glazed HardTop SJS "Prestige" for Nissan Navara NP300 Double Cab

- Compatible with tipper tray
- Tinted tailgate window
- Tinted sliding side windows
- Sliding window on the cab side
- Roof rails that can accommodate carrying bars
- Body-coloured spoiler with 3rd brake light.
- Vinyl interior siding
- Interior lighting
- Central locking

Available in all Nissan Navara colour codes

FORD RANGER DEFLECTORS FORD RANGER AIR DEFLECTORS Set of 4 tinted air deflectors for Ford Ranger Double Cab from 2006 to 2011 - This kit of four deflectors of excellent quality and aesthetics, adds an original PLUS to the design of your vehicle. - These door air deflectors are very useful for diverting air especially in high heat, in dust or... in rainy weather, in the mud... - Economical, they avoid the intensive use of air conditioning! - Drive your Ranger with the windows open and draught-free! - Colour: Smoked - Self-adhesive fasteners

AMAROK HOOD DEFLECTOR

Black hood deflector for VW Amarok Double Cab from 2010 to 2015

Beautiful quality and a well-groomed aesthetic, this hood deflector is very useful for diverting air, dust, mud and rain and also avoids insect harvests and pebbles!

- No drilling: No drilling of the hood, clips and screws on original screws nuts provided.
- Color: Black

L200 SEMI-RIGID TIPPER COVER

Semi-rigid folding bed cover for Mitsubishi L200 Double or Club Cab

Soft Tri-Folder Cover:
- Semi-rigid tipper cover, foldable in 3 parts
- Quick, tool-free installation in 2 minutes
- Made of marine vinyl, ultra weather-resistant
- Highly strong and durable industrial nylon assembly
- Reinforced corners
- Lashing straps provided

Compatible with a Dumpster Bin

FORD RANGER BULL BARS Stainless steel bull bars with reinforcements (protective claws) CE approved for Ford Ranger from 2012 to 2022 - Approved according to European standards - Oval tube diameter 70 mm - Easily attached to the frame: fixing without drilling - Requires overriding of the front sensors - Comes with complete installation kit the installation of this bull bar removes the options of speed limiter and anti-collision detection if your Ranger is equipped with them.

AMAROK BUFFALO PARE
Oval tube stainless steel buffalo for VW Amarok from 2010 to 2016 and 2016 to today
- Approved according to European standards
- Oval tube 90 mm diameter
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of the front sensors
- Comes with full installation kit.

HARD TOP NAVARA

HardTop Luxury Type E for Nissan Navara D40 Double Cab Extended Tipper (160 cm)

The "TYPE E " hardtop is sporty, functional and luxurious at the same time
- Side windows with tinted glass, compass opening
- Opening the window on the cab side
- Rear window defrost
- Stainless steel locking system
- Central locking
- Stainless steel hinges
- Felt interior finish
- Interior lighting
- Body-coloured painted spoiler with integrated 3rd brake light
- SECURIT glass glazing
- Perfect line
- Compatible with rimless dumpster tray
Available in all Nissan Navara colour codes

MAX HOOD DEFLECTOR

Hood deflector for Isuzu D Max RT50 from 2012 to 2016

Beautiful quality and a well-groomed aesthetic, this hood deflector is very useful for diverting air, dust, mud and rain and also avoids insect harvests and pebbles!

- No drilling: No hood piercing, clips and screws onto original screws nuts provided.
- Color: Black
Warning: Not suitable for the new 2017 model

HILUX DEFLECTORS
AIR HILUX DEFLECTORS

Kit of 4 black tinted air deflectors for Toyota Hilux Vigo Double Cabin from 2005 to 2015
- 3M sticker attachments
- This kit of four deflectors of excellent quality and a careful aesthetic, adds an original PLUS to the design of your vehicle.
- These door air deflectors are very useful for diverting air especially in high heat, dust or... in rainy weather, in the mud...
- Economical, they avoid the intensive use of air conditioning!
- Drive your Hilux windows open and without draughts!
- Colors: Black

NAVARA AIR DEFLECTORS NAVARA DEFLECTORS Tinted Air Deflector Kit for Nissan Navara D40 King Cabin from 2005 to 2015 - Self-adhesive fasteners (click on the "Download" tab for installation advice) - This kit of four deflectors of excellent quality and aesthetics, adds an original PLUS to the design of your vehicle. - These door air deflectors are very useful for diverting air especially in high heat, in dust or... in rainy weather, in the mud... - Economical, they avoid the intensive use of air conditioning! - Drive your Navara with the windows open and draught-free! - Colour: Black

FORD RANGER PULL-OUT TRAY Sliding bed bed for Ford Ranger Super Cab from 2012 Designed for easy access to your load, this slide-out bed bed is a must-have tool! With this accessory you can load and unload your skip without having to climb into it. - Easy installation and disassembly (without drilling) - Tray not compatible with an electric curtain - Dimensions: 169 cm long, 126.6 cm wide, 18 cm high (without stand) / 20 cm high with stand. - Supports 250 Kg of load - 3 possible locking notches - Bearing-mounted specially designed for heavy loads - With safety ledge - Easy to handle with a handle - Cleans with a water jet very easily - Height between the bottom of the bed and the platform: 11 to 15 cm